P.R. Pote College of Engineering and Management



Laboratories Details :

1) Strength of Material lab :
Equipments

  • Universal Testing Machine(Capacity 1000 kN )
  • Izod / Charpy Impact testing machine
  • Hardness testing Machine
  • Digital Torsion Testing Machine, Cap 100 Nm

2) RCC (CTE) Lab :
Equipments

  • Sieve shaker, with digital timer given by 1/4 HP motor
  • Vicat needle apparatus
  • Le-chateliermould apparatus
  • Accelerated curing tank(Heating model 12 mould 150mm cube)
  • Vibrating table for compaction of Cement concrete, Table top 1mX1m
  • Mortar mixer
  • Concrete mixer pan type
  • Slump test apparatus
  • Compaction factor apparatus
  • Vibrating machine as per IS- 4031 (Including assembly for vibrating plateform& 70.6mm steel cube mould with base plate for morter strength test)
  • Needle vibrator

3) Transportation Lab :
Equipments

  • AIMIL Devel Abrasion tester,IS:2386(pt-IV) with revolution controller box AIM:457
  • AIMIL Aggregate Impact tester with blow counter IS :2386(pt.IV) AIM:456
  • AIMIL Aggregate Crushing value apparatus,IS:2386,150 mm dia. Steel cylinder, plunger and base plate, tamping rod & metal measure, AIM:455
  • AIMIL Sieve Shaker, motorized with built in Digital timer.
  • AIMIL Standard Viscometer, electrically heated with 10mm cupand Valve, IS:1206,IP:72,supplied with dimmerstat.AIM:531
  • AIMIL Ductility testing machine, electrically operated,IS:1208,with Digital temperature controller,AIM:565-1
  • AIMIL Ring & Ball apparatus electrically heated, digital IS:1205. AIM:561.
  • AIMIL Flash point(closed) Pensky-Marten apparatus,IS:1209,IS:1448 with energy regulator,AIM:509
  • Laboratory Oven, electrically operated, with digital-cum-controller with safety alarm.
  • Vibrating machine as per IS- 4031 (Including assembly for vibrating plateform& 70.6mm steel cube mould with base plate for morter strength test)
  • AIMIL Los angles testing m/c IS :2386(pt.IV) with abrasive charge & digital controller box-AIM:458
  • AIMIL thickness gauge constructed of heavy gauge sheet steel, with ISI mark IS:2386(pt-I) AIM:450
  • AIMIL Length gauge constructed of heavy gauge sheet steel, with ISI mark IS:2386(pt-I) AIM:451
  • AIMIL Marshall apparatus, single speed, with dial gauge and 50 kN capacity proving ring AIM:550-i.

4) Geotechnical Engineering Lab :
Equipments

  • Thermostatic Oven
  • Direct shear test apparatus with two dial gauges and proving ring.(12 speed IS-1229,IS 2720 part 12)
  • Universal or combination permeameter
  • Core cutter - Cylindrical (100m dia. X 127.3mm Ht.)Wall thickness 3mm
  • CBR test apparatus
  • Liquid limit device(Motorised -IS 2720) Grooving tool (IS 9259)
  • Vane shear apparatus Laboratory-motorised (IS 2720 part 30)
  • Tri axial shear test apparatus

5) Fluid Mechanics Lab :
Equipments

  • Centrifugal Pump Set.
  • Reciprocating Pump
  • Hydraulic Ram
  • Francis Turbine Set
  • Pelton Wheel
  • Hydraulic Tilting Flume
  • Wind Tunnels
  • Impact of JET on Van Apparatus
  • Set Up of Venturimeter&Orificemeter
  • Set Up of Friction Fuctor, Minor Losses &Coeff. Of Notches
  • Bernaulli's Apparatus

6) Surveying :
Equipments

  • Prismatic compass
  • Dumpy level
  • Digital level
  • Auto level
  • Planimeter
  • Digital planimeter
  • Plane table set
  • Telescopic alidade
  • Vernier Transit Theoddolite
  • Electronic digital theodolite one second least count one sec. accuracy



P.R. Pote College of Engineering & Management